IPSEC Tunnels

The IPSEC Command-line Interface commands can be used to configure an existing IPSEC tunnel context. Subnets in the SoftLayer private network can be associated to the tunnel context along with user-defined remote subnets. Address translation entries may also be defined to provide NAT functionality from static subnet IP addresses associated with the tunnel context to user-defined remote subnet IP addresses.

Note

Most CLI actions that affect an IPSEC tunnel context do not result in configuration changes to SoftLayer network devices. A separate configure command is available to issue a device configuration request.

ipsec list

ipsec list

List IPSec VPN tunnel contexts

ipsec list [OPTIONS]

Options

--sortby <sortby>

Column to sort by

A list of all IPSEC tunnel contexts associated with the current user’s account can be retrieved via the ipsec list command. This provides a brief overview of all tunnel contexts and can be used to retrieve an individual context’s identifier, which all other CLI commands require.

$ slcli ipsec list
:.....:..........:...............:..........................:........................:...........................:
:  id :   name   : friendly name : internal peer IP address : remote peer IP address :          created          :
:.....:..........:...............:..........................:........................:...........................:
: 445 : ipsec038 :  ipsec tunnel :      173.192.250.79      :      158.85.80.22      : 2012-03-05T14:07:34-06:00 :
:.....:..........:...............:..........................:........................:...........................:

ipsec detail

ipsec detail

List IPSEC VPN tunnel context details.

Additional resources can be joined using multiple instances of the include option, for which the following choices are available.

at: address translations
is: internal subnets
rs: remote subnets
sr: statically routed subnets
ss: service subnets
ipsec detail [OPTIONS] CONTEXT_ID

Options

-i, --include <include>

Include additional resources

Options:

at | is | rs | sr | ss

Arguments

CONTEXT_ID

Required argument

More detailed information can be retrieved for an individual context using the ipsec detail command. Using the detail command, information about associated internal subnets, remote subnets, static subnets, service subnets and address translations may also be retrieved using multiple instances of the -i|--include option.

$ slcli ipsec detail 445 -i at -i is -i rs -i sr -i ss
Context Details:
:.................................:...........................:
:                            name : value                     :
:.................................:...........................:
:                              id : 445                       :
:                            name : ipsec038                  :
:                   friendly name : ipsec tunnel              :
:        internal peer IP address : 173.192.250.79            :
:          remote peer IP address : 158.85.80.22              :
:     advanced configuration flag : 0                         :
:                   preshared key : secret                    :
:          phase 1 authentication : MD5                       :
:    phase 1 diffie hellman group : 0                         :
:              phase 1 encryption : DES                       :
:                phase 1 key life : 240                       :
:          phase 2 authentication : MD5                       :
:    phase 2 diffie hellman group : 1                         :
:              phase 2 encryption : DES                       :
:                phase 2 key life : 240                       :
: phase 2 perfect forward secrecy : 1                         :
:                         created : 2012-03-05T14:07:34-06:00 :
:                        modified : 2017-05-17T12:01:33-06:00 :
:.................................:...........................:
Address Translations:
:.......:...................:......................:...................:......................:.................:
:   id  : static IP address : static IP address id : remote IP address : remote IP address id :       note      :
:.......:...................:......................:...................:......................:.................:
: 15920 :    10.1.249.86    :       9791681        :    158.85.80.22   :        98828         :  windows server :
: 15918 :    10.1.249.84    :       9791679        :    158.85.80.20   :        98824         :   unix server   :
:.......:...................:......................:...................:......................:.................:
Internal Subnets:
:........:....................:......:......:
:   id   : network identifier : cidr : note :
:........:....................:......:......:
: 180767 :    10.28.67.128    :  26  :      :
:........:....................:......:......:
Remote Subnets:
:......:....................:......:......:
:  id  : network identifier : cidr : note :
:......:....................:......:......:
: 7852 :    158.85.80.20    :  30  :      :
:......:....................:......:......:
Static Subnets:
:........:....................:......:......:
:   id   : network identifier : cidr : note :
:........:....................:......:......:
: 231807 :    10.1.249.84     :  30  :      :
:........:....................:......:......:
Service Subnets:
:........:....................:......:......:
:   id   : network identifier : cidr : note :
:........:....................:......:......:
: 162079 :     10.0.80.0      :  25  :      :
:........:....................:......:......:

ipsec update

ipsec update

Update tunnel context properties.

Updates are made atomically, so either all are accepted or none are.

Key life values must be in the range 120-172800.

Phase 2 perfect forward secrecy must be in the range 0-1.

A separate configuration request should be made to realize changes on network devices.

ipsec update [OPTIONS] CONTEXT_ID

Options

--friendly-name <friendly_name>

Friendly name value

--remote-peer <remote_peer>

Remote peer IP address value

--preshared-key <preshared_key>

Preshared key value

--phase1-auth, --p1-auth <phase1_auth>

Phase 1 authentication value

Options:

MD5 | SHA1 | SHA256

--phase1-crypto, --p1-crypto <phase1_crypto>

Phase 1 encryption value

Options:

DES | 3DES | AES128 | AES192 | AES256

--phase1-dh, --p1-dh <phase1_dh>

Phase 1 diffie hellman group value

Options:

0 | 1 | 2 | 5

--phase1-key-ttl, --p1-key-ttl <phase1_key_ttl>

Phase 1 key life value

--phase2-auth, --p2-auth <phase2_auth>

Phase 2 authentication value

Options:

MD5 | SHA1 | SHA256

--phase2-crypto, --p2-crypto <phase2_crypto>

Phase 2 encryption value

Options:

DES | 3DES | AES128 | AES192 | AES256

--phase2-dh, --p2-dh <phase2_dh>

Phase 2 diffie hellman group value

Options:

0 | 1 | 2 | 5

--phase2-forward-secrecy, --p2-forward-secrecy <phase2_forward_secrecy>

Phase 2 perfect forward secrecy value

--phase2-key-ttl, --p2-key-ttl <phase2_key_ttl>

Phase 2 key life value

Arguments

CONTEXT_ID

Required argument

Most values listed in the tunnel context detail printout can be modified using the ipsec update command. The following is given when executing with the -h|--help option and highlights all properties that may be modified.

$ slcli ipsec update -h
Usage: slcli ipsec update [OPTIONS] CONTEXT_ID

  Update tunnel context properties.

  Updates are made atomically, so either all are accepted or none are.

  Key life values must be in the range 120-172800.

  Phase 2 perfect forward secrecy must be in the range 0-1.

  A separate configuration request should be made to realize changes on
  network devices.

Options:
  --friendly-name TEXT            Friendly name value
  --remote-peer TEXT              Remote peer IP address value
  --preshared-key TEXT            Preshared key value
  --p1-auth, --phase1-auth [MD5|SHA1|SHA256]
                                  Phase 1 authentication value
  --p1-crypto, --phase1-crypto [DES|3DES|AES128|AES192|AES256]
                                  Phase 1 encryption value
  --p1-dh, --phase1-dh [0|1|2|5]  Phase 1 diffie hellman group value
  --p1-key-ttl, --phase1-key-ttl INTEGER RANGE
                                  Phase 1 key life value
  --p2-auth, --phase2-auth [MD5|SHA1|SHA256]
                                  Phase 2 authentication value
  --p2-crypto, --phase2-crypto [DES|3DES|AES128|AES192|AES256]
                                  Phase 2 encryption value
  --p2-dh, --phase2-dh [0|1|2|5]  Phase 2 diffie hellman group value
  --p2-forward-secrecy, --phase2-forward-secrecy INTEGER RANGE
                                  Phase 2 perfect forward secrecy value
  --p2-key-ttl, --phase2-key-ttl INTEGER RANGE
                                  Phase 2 key life value
  -h, --help                      Show this message and exit.

ipsec configure

ipsec configure

Request configuration of a tunnel context.

This action will update the advancedConfigurationFlag on the context instance and further modifications against the context will be prevented until all changes can be propgated to network devices.

ipsec configure [OPTIONS] CONTEXT_ID

Arguments

CONTEXT_ID

Required argument

A request to configure SoftLayer network devices for a given tunnel context can be issued using the ipsec configure command.

Note

Once a configuration request is received, the IPSEC tunnel context will be placed into an unmodifiable state, and further changes against the tunnel context will be prevented. Once configuration changes have been made, the tunnel context may again be modified. The unmodifiable state of a tunnel context is indicated by an advanced configuration flag value of 1.

ipsec subnet-add

ipsec subnet-add

Add a subnet to an IPSEC tunnel context.

A subnet id may be specified to link to the existing tunnel context.

Otherwise, a network identifier in CIDR notation should be specified, indicating that a subnet resource should first be created before associating it with the tunnel context. Note that this is only supported for remote subnets, which are also deleted upon failure to attach to a context.

A separate configuration request should be made to realize changes on network devices.

ipsec subnet-add [OPTIONS] CONTEXT_ID

Options

-s, --subnet-id <subnet_id>

Subnet identifier to add

-t, --subnet-type, --type <subnet_type>

Required Subnet type to add

Options:

internal | remote | service

-n, --network-identifier, --network <network_identifier>

Subnet network identifier to create

Arguments

CONTEXT_ID

Required argument

Internal, remote and service subnets can be associated to an IPSEC tunnel context using the ipsec subnet-add command. Additionally, remote subnets can be created using this same command, which will then be associated to the targeted tunnel context.

Note

The targeted subnet type must be specified. A subnet id must be provided when associating internal and service subnets. Either a subnet id or a network identifier must be provided when associating remote subnets. If a network identifier is provided when associating a remote subnet, that subnet will first be created and then associated to the tunnel context.

The following is an exmaple of associating an internal subnet to a tunnel context.

$ slcli ipsec subnet-add 445 --subnet-id 180767 --subnet-type internal
Added internal subnet #180767

The following is an example of creating and associating a remote subnet to a tunnel context.

$ slcli ipsec subnet-add 445 --subnet-type remote --network 50.100.0.0/26
Created subnet 50.100.0.0/26 #21268
Added remote subnet #21268

ipsec subnet-remove

ipsec subnet-remove

Remove a subnet from an IPSEC tunnel context.

The subnet id to remove must be specified.

Remote subnets are deleted upon removal from a tunnel context.

A separate configuration request should be made to realize changes on network devices.

ipsec subnet-remove [OPTIONS] CONTEXT_ID

Options

-s, --subnet-id <subnet_id>

Required Subnet identifier to remove

-t, --subnet-type, --type <subnet_type>

Required Subnet type to add

Options:

internal | remote | service

Arguments

CONTEXT_ID

Required argument

Internal, remote and service subnets can be disassociated from an IPSEC tunnel context via the ipsec subnet-remove command.

Note

The targeted subnet id and type must be specified. When disassociating remote subnets, that subnet record will also be deleted.

The following is an example of disassociating an internal subnet from a tunnel context.

$ slcli ipsec subnet-remove 445 --subnet-id 180767 --subnet-type internal
Removed internal subnet #180767

ipsec translation-add

ipsec translation-add

Add an address translation to an IPSEC tunnel context.

A separate configuration request should be made to realize changes on network devices.

ipsec translation-add [OPTIONS] CONTEXT_ID

Options

-s, --static-ip <static_ip>

Required Static IP address value

-r, --remote-ip <remote_ip>

Required Remote IP address value

-n, --note <note>

Note value

Arguments

CONTEXT_ID

Required argument

Address translation entries can be added to a tunnel context to provide NAT functionality from a statically routed subnet associated with the tunnel context to a remote subnet. This action is performed with the ipsec translation-add command.

Note

Both static and remote IP address values must be specified. An optional note value may also be provided.

The following is an example of adding a new address translation entry.

$ slcli ipsec translation-add 445 --static-ip 10.1.249.87 --remote-ip 50.100.0.10 --note 'email server'
Created translation from 10.1.249.87 to 50.100.0.10 #15922

ipsec translation-remove

ipsec translation-remove

Remove a translation entry from an IPSEC tunnel context.

A separate configuration request should be made to realize changes on network devices.

ipsec translation-remove [OPTIONS] CONTEXT_ID

Options

-t, --translation-id <translation_id>

Required Translation identifier to remove

Arguments

CONTEXT_ID

Required argument

Address translation entries can be removed using the ipsec translation-remove command.

The following is an example of removing an address translation entry.

$ slcli ipsec translation-remove 445 --translation-id 15922
Removed translation #15922

ipsec translation-update

ipsec translation-update

Update an address translation for an IPSEC tunnel context.

A separate configuration request should be made to realize changes on network devices.

ipsec translation-update [OPTIONS] CONTEXT_ID

Options

-t, --translation-id <translation_id>

Required Translation identifier to update

-s, --static-ip <static_ip>

Static IP address value

-r, --remote-ip <remote_ip>

Remote IP address value

-n, --note <note>

Note value

Arguments

CONTEXT_ID

Required argument

Address translation entries may also be modified using the ipsec translation-update command.

The following is an example of updating an existing address translation entry.

$ slcli ipsec translation-update 445 --translation-id 15924 --static-ip 10.1.249.86 --remote-ip 50.100.0.8 --note 'new email server'
Updated translation #15924

ipsec order

Order/create a IPSec VPN tunnel instance.

ipsec order [OPTIONS]

Options

-d, --datacenter <datacenter>

Required Datacenter shortname

ipsec cancel

Cancel a IPSEC VPN tunnel context.

ipsec cancel [OPTIONS] IDENTIFIER

Options

--immediate

Cancels the service immediately (instead of on the billing anniversary)

--reason <reason>

An optional cancellation reason. See cancel-reasons for a list of available options

--force

Force cancel ipsec vpn without confirmation

Arguments

IDENTIFIER

Required argument